CrossCode.← Back to home

HTS code lookup / Chapter 72

IRON AND STEEL

262 classifiable HTS lines in Chapter 72.

Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus7201.10.00.00
Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus7201.20.00.00
Alloy pig iron7201.50.30.00
Spiegeleisen7201.50.60.00
Containing by weight more than 2 percent but not more than 4 percent of carbon7202.11.10.00
Containing by weight more than 4 percent of carbon7202.11.50.00
Containing by weight not more than 1 percent of carbon7202.19.10.00
Containing by weight more than 1 percent but not more than 2 percent of carbon7202.19.50.00
Containing by weight more than 3 percent of calcium7202.21.10.00
Other7202.21.50.00
Containing by weight more than 80 percent but not more than 90 percent of silicon7202.21.75.00
Containing by weight more than 90 percent of silicon7202.21.90.00
Other7202.29.00
Ferrosilicon manganese7202.30.00.00
Containing by weight more than 4 percent of carbon7202.41.00.00
Containing by weight more than 3 percent of carbon7202.49.10.00
Other7202.49.50
Ferrosilicon chromium7202.50.00.00
Ferronickel7202.60.00.00
Ferromolybdenum7202.70.00.00
Ferrotungsten and ferrosilicon tungsten7202.80.00.00
Ferrotitanium and ferrosilicon titanium7202.91.00.00
Ferrovanadium7202.92.00.00
Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon7202.93.40.00
Other7202.93.80.00
Ferrozirconium7202.99.10.00
Calcium silicon7202.99.20.00
Other7202.99.80
Ferrous products obtained by direct reduction of iron ore7203.10.00.00
Other7203.90.00.00
Waste and scrap of cast iron7204.10.00.00
Of stainless steel7204.21.00.00
Other7204.29.00.00
Waste and scrap of tinned iron or steel7204.30.00.00
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles7204.41.00
Other7204.49.00
Remelting scrap ingots7204.50.00.00
Granules7205.10.00.00
Of alloy steel7205.21.00.00
Other7205.29.00.00
Ingots7206.10.00.00
Other7206.90.00.00
Of rectangular (including square) cross section, the width measuring less than twice the thickness7207.11.00.00
Other, of rectangular (other than square) cross section7207.12.00
Other7207.19.00
Containing by weight 0.25 percent or more of carbon7207.20.00
Pickled7208.10.15.00
Of a thickness of 4.75 mm or more7208.10.30.00
Of a thickness of less than 4.75 mm7208.10.60.00
Of high-strength steel7208.25.30.00
Other7208.25.60.00
Of a thickness of 3 mm or more but less than 4.75 mm7208.26.00
Of a thickness of less than 3 mm7208.27.00
Of a thickness exceeding 10 mm7208.36.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm7208.37.00
Of a thickness of 3 mm or more but less than 4.75 mm7208.38.00
Of a thickness of less than 3 mm7208.39.00
Of a thickness of 4.75 mm or more7208.40.30
Of a thickness of less than 4.75 mm7208.40.60
Of a thickness exceeding 10 mm7208.51.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm7208.52.00.00
Of a thickness of 3 mm or more but less than 4.75 mm7208.53.00.00
Of a thickness of less than 3 mm7208.54.00.00
Other7208.90.00.00
Of a thickness of 3 mm or more7209.15.00.00
Of a thickness exceeding 1 mm but less than 3 mm7209.16.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm7209.17.00
Of high-strength steel7209.18.15
Of a thickness of less than 0.361 mm (blackplate)7209.18.25
Other7209.18.60
Of a thickness of 3 mm or more7209.25.00.00
Of a thickness exceeding 1 mm but less than 3 mm7209.26.00.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm7209.27.00.00
Of a thickness of less than 0.5 mm7209.28.00.00
Other7209.90.00.00
Of a thickness of 0.5 mm or more7210.11.00.00
Of a thickness of less than 0.5 mm7210.12.00.00
Plated or coated with lead, including terne-plate7210.20.00.00
Electrolytically plated or coated with zinc7210.30.00
Corrugated7210.41.00.00
Other7210.49.00
Plated or coated with chromium oxides or with chromium and chromium oxides7210.50.00
Plated or coated with aluminum-zinc alloys7210.61.00.00
Other7210.69.00.00
Not coated or plated with metal and not clad7210.70.30.00
Other7210.70.60
Clad7210.90.10.00
Electrolytically coated or plated with base metal7210.90.60.00
Other7210.90.90.00
Universal mill plate7211.13.00.00
Other, of a thickness of 4.75 mm or more7211.14.00
Of high-strength steel7211.19.15.00
Of a thickness exceeding 1.25 mm7211.19.20.00
Other7211.19.30.00
Of high-strength steel7211.19.45.00
Pickled7211.19.60.00
Other7211.19.75
Of high-strength steel7211.23.15.00
Other7211.23.20.00
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7211.23.30.00
Of a thickness not exceeding 0.25 mm7211.23.45.00
Other7211.23.60
Of a thickness exceeding 0.25 mm7211.29.20
Other7211.29.45.00
Other7211.29.60
Other7211.90.00.00
Plated or coated with tin7212.10.00.00
Electrolytically plated or coated with zinc7212.20.00.00
Of a thickness exceeding 0.25 mm or more7212.30.10
Other7212.30.30.00
Other7212.30.50.00
Of a width of less than 300 mm7212.40.10.00
Other7212.40.50.00
Otherwise plated or coated7212.50.00.00
Clad7212.60.00.00
Concrete reinforcing bars and rods7213.10.00.00
Other, of free-cutting steel7213.20.00
Not tempered, not treated and not partly manufactured7213.91.30
Containing by weight 0.6 percent or more of carbon7213.91.45.00
Other7213.91.60.00
Other7213.99.00
Forged7214.10.00.00
Concrete reinforcing bars and rods7214.20.00.00
Other, of free-cutting steel7214.30.00
Of rectangular (other than square) cross-section7214.91.00
Other7214.99.00
Of free-cutting steel, not further worked than cold-formed or cold-finished7215.10.00
Other, not further worked than cold-formed or cold-finished7215.50.00
Not cold-formed7215.90.10.00
Cold-formed7215.90.30.00
Other7215.90.50.00
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm7216.10.00
L sections7216.21.00.00
T sections7216.22.00.00
U sections7216.31.00.00
I sections (standard beams)7216.32.00.00
H sections7216.33.00
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more7216.40.00
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded7216.50.00.00
Obtained from flat-rolled products7216.61.00.00
Other7216.69.00.00
Cold-formed or cold-finished from flat-rolled products7216.91.00
Other7216.99.00
Of a thickness not exceeding 0.25 mm7217.10.10.00
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7217.10.20.00
Of a thickness exceeding 1.25 mm7217.10.30.00
With a diameter of less than 1.5 mm7217.10.40
With a diameter of 1.5 mm or more7217.10.50
Other wire7217.10.60.00
Flat wire7217.10.70.00
Round wire7217.10.80
Other wire7217.10.90.00
Flat wire7217.20.15.00
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon7217.20.30.00
Other7217.20.45
Containing by weight less than 0.25 percent of carbon7217.20.60.00
Other7217.20.75.00
Flat wire7217.30.15
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon7217.30.30.00
Other7217.30.45
Containing by weight less than 0.25 percent of carbon7217.30.60.00
Other7217.30.75.00
Coated with plastics7217.90.10.00
Other7217.90.50
Ingots and other primary forms7218.10.00.00
Of rectangular (other than square) cross-section7218.91.00
Other7218.99.00
Of a thickness exceeding 10 mm7219.11.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm7219.12.00
Of a thickness of 3 mm or more but less than 4.75 mm7219.13.00
Of a thickness of less than 3 mm7219.14.00
Of a thickness exceeding 10 mm7219.21.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm7219.22.00
Of a thickness of 3 mm or more but less than 4.75 mm7219.23.00
Of a thickness of less than 3 mm7219.24.00
Of a thickness of 4.75 mm or more7219.31.00
Of a thickness of 3 mm or more but less than 4.75 mm7219.32.00
Of a thickness exceeding 1 mm but less than 3 mm7219.33.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm7219.34.00
Of a thickness of less than 0.5 mm7219.35.00
Other7219.90.00
Of a thickness of 4.75 mm or more7220.11.00.00
Of a width of 300 mm or more7220.12.10.00
Of a width of less than 300 mm7220.12.50.00
Of a width of 300 mm or more7220.20.10
Of a thickness exceeding 1.25 mm7220.20.60
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7220.20.70
Razor blade steel7220.20.80.00
Other7220.20.90
Other7220.90.00
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel7221.00.00
Of circular cross-section7222.11.00
Other7222.19.00
Bars and rods, not further worked than cold-formed or cold-finished7222.20.00
Other bars and rods7222.30.00
Hot-rolled, not drilled, not punched and not otherwise advanced7222.40.30
Other7222.40.60.00
Round wire7223.00.10
Flat wire7223.00.50.00
Other7223.00.90.00
Ingots and other primary forms7224.10.00
Other7224.90.00
Grain-oriented7225.11.00.00
Other7225.19.00.00
Of tool steel7225.30.11
Other7225.30.30
Of tool steel7225.30.51
Other7225.30.70.00
Of tool steel7225.40.11
Other7225.40.30
Of tool steel7225.40.51
Other7225.40.70.00
Of tool steel7225.50.11
Of a thickness of 4.75 mm or more7225.50.60.00
Heat-resisting steel7225.50.70.00
Other7225.50.80
Electrolytically plated or coated with zinc7225.91.00.00
Otherwise plated or coated with zinc7225.92.00.00
Other7225.99.00
Of a width of 300 mm or more7226.11.10.00
Of a width of less than 300 mm7226.11.90
Of a width of 300 mm or more7226.19.10.00
Of a width of less than 300 mm7226.19.90.00
Of high-speed steel7226.20.00.00
Of chipper knife steel7226.91.05.00
Of a width of 300 mm or more7226.91.15
Of a width of less than 300 mm7226.91.25
Of a thickness of 4.75 mm or more7226.91.50.00
Of a width of 300 mm or more7226.91.70.00
Of a width of less than 300 mm7226.91.80.00
Of a width of 300 mm or more7226.92.10
Of a width of less than 300 mm7226.92.30
Of a width of 300 mm or more7226.92.50.00
Of a thickness not exceeding 0.25 mm7226.92.70
Of a thickness exceeding 0.25 mm7226.92.80
Other7226.99.01
Of high-speed steel7227.10.00.00
Of silico-manganese steel7227.20.00
Not tempered, not treated, and not partly manufactured7227.90.10
Other7227.90.20
Other7227.90.60
Bars and rods, of high-speed steel7228.10.00
Not cold-formed7228.20.10.00
Cold-formed7228.20.50.00
Of ball-bearing steel7228.30.20.00
Of chipper knife steel, not cold-formed7228.30.40.00
Other7228.30.60.00
Other7228.30.80
Other bars and rods, not further worked than forged7228.40.00.00
Of tool steel (other than high-speed steel)7228.50.10
Other7228.50.50
Of tool steel (other than high-speed steel)7228.60.10
Not cold-formed7228.60.60.00
Cold-formed7228.60.80.00
Hot-rolled, not drilled, not punched and not otherwise advanced7228.70.30
Other7228.70.60.00
Hollow drill bars and rods7228.80.00.00
Of silico-manganese steel7229.20.00
Of high-speed steel7229.90.05.00
Flat wire7229.90.10.00
Round wire7229.90.50
Other wire7229.90.90.00