HTS code lookup / Chapter 74
COPPER AND ARTICLES THEREOF
89 classifiable HTS lines in Chapter 74.
Copper mattes; cement copper (precipitated copper)7401.00.00.00
Unrefined copper; copper anodes for electrolytic refining7402.00.00.00
Cathodes and sections of cathodes7403.11.00.00
Wire bars7403.12.00.00
Billets7403.13.00.00
Other7403.19.00.00
Copper-zinc base alloys (brass)7403.21.00.00
Copper-tin base alloys (bronze)7403.22.00.00
Other copper alloys7403.29.01
Spent anodes; waste and scrap with a copper content of less than 94 percent by weight7404.00.30
Other7404.00.60
Containing by weight 5 percent or more but not more than 15 percent of phosphorus7405.00.10.00
Other7405.00.60
Powders of non-lamellar structure7406.10.00.00
Powders of lamellar structure; flakes7406.20.00.00
Hollow profiles7407.10.15.00
Other7407.10.30.00
Bars and rods7407.10.50
Hollow profiles7407.21.15.00
Other7407.21.30.00
Low fuming brazing rods7407.21.50.00
Having a rectangular cross section7407.21.70.00
Other7407.21.90.00
Hollow7407.29.16
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)7407.29.34.00
Other7407.29.38.00
Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)7407.29.40.00
Other bars and rods7407.29.50.00
With a maximum cross-sectional dimension over 9.5 mm7408.11.30.00
With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm7408.11.60.00
Other7408.19.00
Of copper-zinc base alloys (brass)7408.21.00.00
Coated or plated with metal7408.22.10.00
Not coated or plated with metal7408.22.50.00
Coated or plated with metal7408.29.10.00
Not coated or plated with metal7408.29.50.00
Of a thickness of 5 mm or more7409.11.10.00
Of a thickness of less than 5 mm7409.11.50
Of a thickness of 5 mm or more7409.19.10.00
Of a width of 500 mm or more7409.19.50.00
Of a width of less than 500 mm7409.19.90.00
In coils7409.21.00
Other7409.29.00
Of a thickness of 5 mm or more7409.31.10.00
Of a width of 500 mm or more7409.31.50.00
Of a width of less than 500 mm7409.31.90.00
Of a thickness of 5 mm or more7409.39.10
Of a width of 500 mm or more7409.39.50.00
Of a width of less than 500 mm7409.39.90
Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver)7409.40.00.00
Of a thickness of 5 mm or more7409.90.10
Of a width of 500 mm or more7409.90.50
Of a width of less than 500 mm7409.90.90
Of refined copper7410.11.00.00
Of copper alloys7410.12.00
Copper clad laminates7410.21.30
Other7410.21.60.00
Of copper alloys7410.22.00.00
Seamless7411.10.10
Other7411.10.50.00
Seamless7411.21.10.00
Other7411.21.50.00
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver)7411.22.00.00
Seamless7411.29.10.00
Other7411.29.50.00
Of refined copper7412.10.00.00
Of copper alloys7412.20.00
Stranded wire7413.00.10.00
Other7413.00.50.00
Fitted with fittings or made up into articles7413.00.90.00
Nails and tacks, drawing pins, staples and similar articles7415.10.00.00
Washers (including spring washers)7415.21.00.00
Other7415.29.00.00
Screws for wood7415.33.05.00
Muntz or yellow metal bolts7415.33.10.00
Other screws and bolts; nuts7415.33.80
Other7415.39.00.00
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like7418.10.00
Of copper-zinc base alloys (brass)7418.20.10.00
Other7418.20.50.00
Cast, molded, stamped or forged, but not further worked7419.20.00
Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter7419.80.03.00
Other7419.80.06
Other7419.80.09.00
Containers of a kind normally carried on the person, in the pocket or in the handbag7419.80.15.00
Copper springs7419.80.16.00
Chain and parts thereof7419.80.17.00
Coated or plated with precious metal7419.80.30.00
Other7419.80.50